The Overall Solution of Smart LED Street Lighting

Share to:

NBIoT LED Light Controller Max Support 2000W

WE-CON-20 wireless single-light controller can realize dual color temperature control function. Under harsh weather conditions such as rain, fog, smog, snow, and sand, the artificial intelligence system will collect PM2.5, temperature, humidity, rainwater, and other data, then precisely adjusted the light to a yellow with a color temperature of 3000K. The yellow light has good diffractive properties, high scattering intensity, and radiation wavelength, which makes the light penetration ability stronger and effectively solves the driving problem and keep the driver safe.
  • WE-CON-NB20
  • HonorInsight
  • 8537109090
  • Shenzhen, China
  • 5000000PCS/Year
  • T/T
  • 3 years
Size:
Color:
protection grade:
protocol:
Availability:
Quantity:

PDF Export

NBIoT LED Light Controller Max Support 2000W

DSC_51411 拷贝


Brief introduction

   WE-CON-10 is the latest development of the mains street lamp single-lamp controller. The communication method adopts narrow-band LoRa technology, which has long communication range, high sensitivity, strong anti-interference performance and low power consumption. The product has single-lamp intelligent switch and dimming function, power parameter monitoring function and energy saving income analysis. With the Lampmind: intelligent street lamp system, the smart management of street lamps can be easily realized.
 



Features

    0-10V/PWM dimming
    Self-adaptive light control
    Power parameters monitoring
    Over-voltage and over-current protection
    Lightning protection
    Anomaly alarm
    Lampmind system

 



 Technical parameters
Input voltage AC85V~265V
Output voltage AC85V~265V
Output current 5.2A
Dimming way 0-10V/PWM dimming
Communication protocol NBIOT
Working frequency As local needs
Transmit power 17dB
Sensitivity -142dB(±1dB)
Antenna gain 3dB
Power parameters voltage,current,power factor,power
Dimension 170L*50W*35H(MM)
IP level IP65
External connection normal connection



Wiring way:


Controller input (three-core wire): 
Live wire: brown        Neutral line: gray           Ground wire: green
Controller output(five-core wire): 
Live wire: black          Neutral line: gray            PWM+: brown            0-10V+:blue           GND: green
Waterproof Remote Controller with Wireless Dimmer and Lighting Console




What can the system do?
--Support remote switch on/off, dimming, color temperature adjusting, group controlling, camera monitoring...
--Support electricity report of power consumption & power saving
--Support interval status report and fault alarm
--Support power rate setting and electricity bill checking


Waterproof Remote Controller with Wireless Dimmer and Lighting Console




Factory 


Cases around the world


Waterproof Remote Controller with Wireless Dimmer and Lighting Console
                                                              Kuala Lumpu, Malaysia


Waterproof Remote Controller with Wireless Dimmer and Lighting Console
                                                                     
 For high mast lights at a mine, China


Waterproof Remote Controller with Wireless Dimmer and Lighting Console
                              Government project for a college-- 318 pcs smart lights in Wuxi


Waterproof Remote Controller with Wireless Dimmer and Lighting Console
Government project for an airport-- 38 pcs smart lights in Inner Mongolia, where tempetrature can reach -35C  



FAQ:


1. What's the protocol controller and gateway used?
     Standard LoRaWAN protocol.

2. What frequency controller and gateway support?
    470M/510M/868M/915M.

3. What are the requirements for light to install the system?
    Lights must have a dimmable driver capable of receiving either 0-10VDC or PWM dimming signal.

4. What's the max light power controller can support?
    Below 800w for now. So it also can be used for High Mast lights.

5. Where should be light controllers installed?
    There are two controllers for options. WE-MA-10 can be used for lights with NEMA interface while WE-CON-10 can be installed inside lights that without NEMA interface or in transformation project.

6. How should I cofigure light controllers network in order to establish server connection?
    There is no need for any configuration. Once the controllers are installed they start the communication and establish connection with central server software automatically.

7. Where can be installed network gateway?
    Gateway can be installed any highest location within radio coverage of light controllers network.





CE certificate


Waterproof Remote Controller with Wireless Dimmer and Lighting Console


 


Previous: 
Next: 
Guangdong HonorInsight IoT Technology Co., Ltd.             simple and trustworthy, open and win-win
  sale@honorinsight.com  jerry.huang@honorinsight.com
Wechat QR code
Wechat
Copyright © 2020 Guangdong HonorInsight IoT Technology Co., Ltd.  All Rights Reserved.