The Overall Solution of Smart LED Street Lighting

Share to:

2G (GPRS)10A MPPT Solar Charge Controller 12V 24V

The DM120-U controller can record the operating status of the whole system, including operating days, over-dischargings, full-chargings, etc. And besides, it can also keep a record of battery voltage changes in a week, enabling the user to have a clear understanding of the system and conduct better analysis on it. The user needs to use the remote control (CU-ALL) to read the system's operating status, and when the reading is successfully done, the parameters will be recorded in the remote control.
  • DM120-U
  • HonorInsight
  • 9032899090
  • Shenzhen, China
  • 5000000PCS/Year
  • T/T, Paypal
  • 3 years / 5years
Size:
protocol:
Availability:
Quantity:

PDF Export

2G (GPRS)10A MPPT Solar Charge Controller 12V 24V
gprs controller




Product Introduction:

-- Innovative MPPT technology, tracking efficiency 99%, conversion efficiency up to 96% 
-- MPPT 10A/15A/20A
-- 12V/24V system voltage
-- Four stage charge status: MPPT, boost, equal, float
-- External temperature sensor
-- Remote control to read value of solar panal, luminaire and battery
-- IP68, water-proof
-- customised strategy supported



Product Parameter:


Items Value
Model DM60 DM120 DM160
System voltage 12V/24V
Zero load loss < 25mA/12V; < 15mA/24V;
Load current 50mA~3960mA 50mA~3960mA 50mA~5280mA
Load voltage 12V system: 15V to 60V / 24V system: 30V to 60V
Maximum power of the load 60W/12V 60W/12V;120W/24V 80W/12V;160W/24V
Charge and discharge conversion efficiency 90% ~ 96%
Load current accuracy < 3%
MPPT tracking efficiency > 99%
Maximum charge current 10A 10A 15A
Maximum solar panel power 130W/12V 130W/12V;260W/24V 200W/12V;400W/24V
Solar input voltage ≤ 60V ≤ 60V
Step-up charge voltage/charge voltage 14.4V (lead acid battery); 12.5V (lithium battery) (settable)
Floating charge voltage/charge return voltage 13.8V (lead-acid battery); 12.0V (lithium battery) (settable)
Over discharge voltage 11.0V (lead-acid battery); 9.2V (lithium battery) (settable)
Over discharge return voltage 12.6V (lead acid battery); 10.2V (lithium battery) (settable)
Light control voltage 5V ~ 15V (settable)
Light control delay 1min ~ 60min (settable)
Operating temperature -35ºC ~ +65ºC;
IP rating IP68
Weight 380g 380g 480g
Controller dimensions (mm) 114×88×25 114×88×25 142×88×25
Controller installation size (mm) 74×82 74×82 102×82



Product show:
gprs light controller

gprs module

                                                      Local sim card provided by client




Factory 

微信图片_20201229104833微信图片_20201229104811微信图片_20201229104837




Exihibition show:
10A Lora Solar Street Light Controller for Smart Solar Lighting




Cases around the world

10A Lora Solar Street Light Controller for Smart Solar Lighting
10A Lora Solar Street Light Controller for Smart Solar Lighting

                                                            Solar Pilot project in Skate Park, Missouri city, Texas



10A Lora Solar Street Light Controller for Smart Solar Lighting
10A Lora Solar Street Light Controller for Smart Solar Lighting
10A Lora Solar Street Light Controller for Smart Solar Lighting
                                                                  1500pcs smart solar lights in Antofagasta, Puerta, Chile





FAQ:

1. What's the protocol controller used?
     Local GPRS/2G celluar provided by local sim card.

2. What is the process?
    Client provides sim card to us for development<>sample testing<>mass production.

3. What's the max light power controller can support?
There are four controllers from 60w to 200w, pls check below parameter of them:

Module Battery volatage Max light power Max panel power Max charge current
DM60-U 12v 60w 130w 10A
DM120-U 12v/24v 60w/120w 130w/260w 10A
DM160-U 12v/24v 80w/120w 200w/400w 15A
DM200-U 12v/24v 100w/200w 260w/520w 20A


4. Where should be light controllers installed?
  The controller is of IP68 protection level, so it can be installed both inside or outside the light with the antenna outside to get good signal.

5. How should I cofigure light controllers network in order to establish server connection?
  There is no need for any configuration. Once the controllers are installed they start the communication and establish connection with central server software automatically.

 

Previous: 
Next: 
Guangdong HonorInsight IoT Technology Co., Ltd.             simple and trustworthy, open and win-win
  sale@honorinsight.com  jerry.huang@honorinsight.com
Wechat QR code
Wechat
Copyright © 2020 Guangdong HonorInsight IoT Technology Co., Ltd.  All Rights Reserved.