2G (GPRS)10A MPPT Solar Charge Controller 12V 24V
Product Description
Product Introduction:
-- Innovative MPPT technology, tracking efficiency 99%, conversion efficiency up to 96%-- MPPT 10A/15A/20A
-- 12V/24V system voltage
-- Four stage charge status: MPPT, boost, equal, float
-- External temperature sensor
-- Remote control to read value of solar panal, luminaire and battery
-- IP68, water-proof
-- customised strategy supported
Product Parameter:
Items | Value | ||
Model | DM60 | DM120 | DM160 |
System voltage | 12V/24V | ||
Zero load loss | < 25mA/12V; < 15mA/24V; | ||
Load current | 50mA~3960mA | 50mA~3960mA | 50mA~5280mA |
Load voltage | 12V system: 15V to 60V / 24V system: 30V to 60V | ||
Maximum power of the load | 60W/12V | 60W/12V;120W/24V | 80W/12V;160W/24V |
Charge and discharge conversion efficiency | 90% ~ 96% | ||
Load current accuracy | < 3% | ||
MPPT tracking efficiency | > 99% | ||
Maximum charge current | 10A | 10A | 15A |
Maximum solar panel power | 130W/12V | 130W/12V;260W/24V | 200W/12V;400W/24V |
Solar input voltage | ≤ 60V | ≤ 60V | |
Step-up charge voltage/charge voltage | 14.4V (lead acid battery); 12.5V (lithium battery) (settable) | ||
Floating charge voltage/charge return voltage | 13.8V (lead-acid battery); 12.0V (lithium battery) (settable) | ||
Over discharge voltage | 11.0V (lead-acid battery); 9.2V (lithium battery) (settable) | ||
Over discharge return voltage | 12.6V (lead acid battery); 10.2V (lithium battery) (settable) | ||
Light control voltage | 5V ~ 15V (settable) | ||
Light control delay | 1min ~ 60min (settable) | ||
Operating temperature | -35ºC ~ +65ºC; | ||
IP rating | IP68 | ||
Weight | 380g | 380g | 480g |
Controller dimensions (mm) | 114×88×25 | 114×88×25 | 142×88×25 |
Controller installation size (mm) | 74×82 | 74×82 | 102×82 |
Product show:
Local sim card provided by client
Factory
Cases around the world
Solar Pilot project in Skate Park, Missouri city, Texas
FAQ:
1. What's the protocol controller used?
Local GPRS/2G celluar provided by local sim card.
2. What is the process?
Client provides sim card to us for development<>sample testing<>mass production.
3. What's the max light power controller can support?
There are four controllers from 60w to 200w, pls check below parameter of them:
Module | Battery volatage | Max light power | Max panel power | Max charge current |
DM60-U | 12v | 60w | 130w | 10A |
DM120-U | 12v/24v | 60w/120w | 130w/260w | 10A |
DM160-U | 12v/24v | 80w/120w | 200w/400w | 15A |
DM200-U | 12v/24v | 100w/200w | 260w/520w | 20A |
4. Where should be light controllers installed?
The controller is of IP68 protection level, so it can be installed both inside or outside the light with the antenna outside to get good signal.
5. How should I cofigure light controllers network in order to establish server connection?
There is no need for any configuration. Once the controllers are installed they start the communication and establish connection with central server software automatically.